0.2
General Information
This measuring instrument conforms to the (2014/30/EU) standard
and fulfils the requirements of applicable European and national
directives. Appropriate declarations and documentation are located
with the manufacturer. The user must read these operating
instructions in order to guarantee problem-free instrument
operation and operational safety. The measuring instrument may
only be operated under the specified climatic conditions. These
conditions can be found in Section 3.1 "Specifications". In addition,
this measuring instrument may only be operated under the
conditions and for the purpose it was designed for. The operational
safety and functionality are no longer guaranteed if the instrument
is modified or converted. Gann Mess- u. Regeltechnik GmbH
assumes no liability for any ensuing damage. All risks are assumed
solely by the user.
Use appropriate means to make absolutely sure that the
area to be measured contains no electrical wires,
plumbing or other supply lines.
The instrument may not be stored or operated in
aggressive atmospheres or atmospheres containing
solvents!
It is not possible to measure material that is frozen or has
a wet surface.
The notes and tables on allowable or common moisture
conditions in practice and general definitions given in
these instructions were taken from the technical literature.
The manufacturer therefore cannot accept any liability for
correctness.
Hydromette BL Compact B 2
The
conclusions
Introduction
drawn
from
the
5
Need help?
Do you have a question about the Hydromette BL Compact B 2 and is the answer not in the manual?
Questions and answers