Table of Contents
Advertisement
Inserting the
batteries
R USE ONLY Alkaline batteries AA
(LR6) size.
R Do NOT use Manganese/Ni-Cd/
Ni-MH batteries.
R Confirm the polarities (
1
Remove the rear cover by
pressing the upper sides of the
cover (A) and sliding it down (B).
2
Insert the batteries.
For assistance, please visit www.panasonic.com/support
HNS104_(en_en)_1120_ver.010.pdf
,
).
A
B
9
3
Install the rear cover.
R Place it with the "
facing upwards and slide it.
Registering the
sensor
This procedure is not required for
devices that were included as part of
a bundle.
Before you can use the sensor, it must
be registered to the hub.
If you purchased devices separately
(i.e., not as part of a bundle), you must
register each device to the hub.
You can register each device by using
the registration buttons or the [Home
Network] app.
Setup
" mark
9
2014/11/19
19:59:09
Advertisement
Table of Contents
