Table of Contents
Advertisement
Inserting the
batteries
R USE ONLY Alkaline batteries AA
(LR6) size.
R Do NOT use Manganese/Ni-Cd/
Ni-MH batteries.
R Confirm the polarities (
1
Remove the rear cover by
pressing the upper sides of the
cover (A) and sliding it down (B).
2
Insert the batteries.
,
).
A
B
3
Install the rear cover.
R Place it with the "
facing upwards and slide it.
Note:
R If the sensor's battery power is low,
a message will be displayed on the
[Sensor] screen of the [Home
Network] app. We recommend you
check this screen periodically to
ensure that the battery does not
become fully discharged. For more
information, refer to the User's
Guide (page 17).
Setup
" mark
9
Advertisement
Table of Contents
