Selecting A Soundstage Menu; Dynamic Soundstage Organizer - Sony CDX-C9500 Operating Instructions Manual

3
Rotate the dial to select the desired
listening position.
All y Front y Front-R y Front-L y Rear y
off
The listening positions appear in the order
shown above.
To cancel the POS mode, select "off."
After three seconds, the display returns to
the normal playback mode.
Adjusting the listening position
1
Press (SOUND) for two seconds.
2
Press (SOUND) repeatedly to select
"POS" appears.
3
Press (5) (t ).
4
Rotate the dial to adjust the centre of
the sound field to the left or right.
Centre moves to the L (left).
Centre moves to the R (right).
To restore the factory-set listening position,
press (6) (ENTER) for two seconds.
5
Press (5) (t ) .
6
Rotate the dial to adjust the centre of
the sound field to the front or rear.
Centre moves to the R (rear).
Centre moves to the F (front).
To restore the factory-set listening position,
press (6) (ENTER) for two seconds.
7
Press (SOUND) for two seconds.
When the effect setting is complete, the
normal playback mode appears.
Selecting a soundstage
menu
— Dynamic Soundstage Organizer (DSO)
If your speakers are installed into the lower
part of the doors, the sound will come from
below and may not be clear.
The DSO (Dynamic Soundstage Organizer)
function creates a more ambient sound as if
there were speakers in the dashboard (virtual
speakers).
You can adjust the sound to your own
preferences to reproduce the ambient qualities
of a concert hall or night club.
Soundstage menu
Memory presets Meaning
Virtual speakers (standard)
1 E-STD
2 ES-CLUB Virtual speakers (standard)
+ initial reflection
3 ES-LIVE Virtual speakers (standard)
+ reverberation
4 E-WIDE Virtual speakers (wide)
5 EW-CLUB Virtual speakers (wide)
+ initial reflection
6 EW-LIVE Virtual speakers (wide)
+ reverberation
7 LIVE Reverberation
Initial reflection
8 CLUB
off Cancel
Image of virtual speakers
1
*
1
*
2
*
3
*
1 Standard
*
2 Wide
*
3 Acutual speakers position (lower part of the
*
front doors).
GB
2
*
3
*
19