Sony CDX-C9500 Operating Instructions Manual page 28

5
When you finish entering tracks, press
(4) (PLAY MODE) for two seconds.
6
Press (SHIFT).
Notes
• "*Wait*" appears in the display while the unit is
reading the data, or if a disc has not been put
into the unit.
• "*Mem Full*" appears in the display when you
try to enter more than 24 tracks into a
programme.
Playing the stored programme
Changing the disc order in the unit will not
affect programme memory play.
1
Press (SHIFT).
2
Press (4) (PLAY MODE) repeatedly until
"PGM" appears.
3
Press (5) (t) repeatedly until "PGM on"
GB
appears.
Programme Play starts.
4
Press (SHIFT).
To return to normal playback mode, select
"PGM off" in step 3 above.
Notes
• If you press a number button during programme
memory play, programme memory play is
interrupted, and playback of the selected disc
starts.
• "NO Data" appears in the display if no track is
stored in the programme.
• If a track stored into the programme memory is
not in the disc magazine, the track will be
skipped.
• When the disc magazine contains no tracks
stored into the programme memory, or when
the programme information has not been loaded
yet, "Not ready" appears.
28
Erasing an entire programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display "P " above.
2
Press (2) (T) repeatedly until "DEL"
appears.
3
Press (6) (ENTER) for two seconds.
The entire programme is erased.
4
When you finish erasing programmes,
press (4) (PLAY MODE) for two seconds.
5
Press (SHIFT).