Selecting A Desired Disc; Locating A Particular Selection; Locating A Particular Point In A Selection - Sony CDP-C425 Operating Instructions Manual

COP-C425
CDP-C325/C225
CODP-C425/C325 only
10
numeric >10 DISC SKIP
buttons
(1-10)
DISC SKIP
Selecting a Desired Disc
By using the DISC 1 to 5 buttons or the DISC SKIP button
during play, you can locate the beginning of any disc.
To select a particular disc Press the corresponding
DISC 1 to 5 button.
To move to the disc tray Press DISC SKIP button.
next to the current one
Locating a Particular Selection
Locating a selection in sequence (Automatic Music
Sensor)
You can locate the beginning of a selection on the disc
being played.
To locate the beginning of Press I< once.
the selection being played
To locate the beginning of Press >P once.
the next selection
Continue to press until the selection you want is located.
To locate directly
(Except for CDP-C225. For the CDP-C325, this function
can be operated with the remote commander only.)
Press one of the numeric buttons ( [1] to [70] ) to enter the
desired selection number.
If a selection number is greater than 10, use the ($70)
and [T] to [10] buttons. (16) functions as the figure 0.
e.g. To play from selection No. 22 Press (> 10)(2)(2)
To play from selection No. 30 Press C 10)(3)(10)
Locating a Particular Point in a
Selection
Locating a point in sequence (Manual Search)
You can locate a particular point during play by monitoring
the high-speed sound.
To go back at high speed Keep td pressed.
To go ahead at high speed | Keep ® pressed.
Release the button when you reach the point you want.
To locate at higher speed
Press << or BP in the pause mode. Search speed will
increase three times, but there will be no sound. Find the
desired point by watching the number in the display.