Preparing the rotary
commander
When you mount the rotary commander,
attach the label as shown in the illustration
below.
Setting the clock
The clock uses a 12-hour digital indication.
Example: To set the clock to 10:08
1
Press (SHIFT), then press (3) (SET UP)
repeatedly until "Clock" appears.
1 Press (5) (t).
The hour digit flashes.
2 Set the hour.
to go backward
to go forward
3 Press (5) (t).
The minute digits flash.
4 Set the minute.
to go backward
to go forward
2
Press (SHIFT).
The clock starts.
3
Press (SHIFT).
After the mode setting is complete, the
display returns to normal playback mode.
GB
7