Sony CDX-C9500 Operating Instructions Manual page 11

Adding tracks to a programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
2
Press (2) (T) or (5) (t) to select the
track slot number where you want to
insert a track.
Track slot number
3
Push the SEEK/AMS control up or down
to select the track you want to insert.
4
Press (6) (ENTER) momentarily to enter
the track.
The current track is inserted in that slot
number and the succeeding tracks shift
down.
5
To continue inserting tracks, repeat steps
2 through 4.
Note
Once all 24 slots have been filled, "*Mem
Full*" appears in the display, and you cannot
insert more tracks.
6
When you finish inserting tracks, press
(4) (PLAY MODE) for two seconds.
7
Press (SHIFT).
Erasing tracks in a programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
2
Press (2) (T) or (5) (t) to select the
track you want to erase.
The track currently registered in slot 6
3
Press (6) (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
x
4
To continue erasing tracks, repeat steps
2 and 3.
5
When you finish erasing tracks, press (4)
(PLAY MODE) for two seconds.
6
Press (SHIFT).
Track slot number
GB
11