Creating A Programme; Cd Programme Memory - Sony CDX-C9500 Operating Instructions Manual

Creating a programme

— CD Programme Memory

You can play the tracks in any order you want
by making your own programme. You can
select up to 24 tracks for a programme. You
can store the programmes in memory.
1
During CD play back, press (SHIFT), then
press (4) (PLAY MODE) for two seconds.
2
Push the SEEK/AMS control up or down
to select the track you want.
3
Press (6) (ENTER) momentarily.
GB
4
To continue entering tracks, repeat steps
2 and 3.
5
When you finish selecting tracks, press
(4) (PLAY MODE) for two seconds.
6
Press (SHIFT).
Notes
• "*Wait*" appears in the display while the unit is
reading the data.
• "*Mem Full*" appears in the display when you
try to enter more than 24 tracks into a
programme.
10
x
Playing the stored programme
1
Press (SHIFT).
2
Press (4) (PLAY MODE) repeatedly until
"PGM" appears.
3
Press (5) (t) repeatedly until "PGM on"
appears.
Programme Play starts.
4
Press (SHIFT).
To return to the normal playback mode, select
"PGM off" in step 3 above.
Note
"Not ready" appears in the display if a disc that
has no programmed tracks is inserted.
Erasing an entire programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
2
Press (2) (T) repeatedly until "DEL"
appears.
3
Press (6) (ENTER) for two seconds.
The entire programme is erased.
4
When you finish erasing programmes,
press (4) (PLAY MODE) for two seconds.
5
Press (SHIFT).