Prestigio P151 User Manual page 24

15" tft lcd color monitor
Hide thumbs Also See for P151:
Table of Contents

Advertisement

US
Problem
Possible solution
Image is not stable
If the setting is not correct, use your computer utility program to
change the display settings.
Message : No signal
Check that the signal cabel connector is properly connected and
that the connection pins are not bent or damaged.
If the connector is loose, tighten the connector's screws. Check
that the computer is switched on.
The power LED is a orange
To enter a power saving mode. You can reactivate the system by
color
pressing any key or moving the mouse.
LED Indicator can be orange color on changeing of video mode or
Input Signal(D sub/DVI).
Check the Resolution and the frequency on the video part of your
computer. Compare these values with the data in the Preset Timing
Table.
Contacting service
If the above troubleshooting hints do not help you find a solution to the problem, contact an autho
rized service agent. If the monitor is sent for service, use the original package if possible.
Unplug the display unit from the power outlet and contact a service agent when:
• The monitor does not operate normally according to the operating instructions.
• The monitor exhibits a distinct change in performance.
• The monitor has been dropped or the cabinet has been damaged.
• The monitor has been exposed to rain, or water or liquid has been spilled onto the
monitor.
15" TFT LCD Color Monitor
SK
24
Prestigio P151

Advertisement

Table of Contents
loading

Table of Contents