Driver Information Display; Introduction - Peterbilt 348 2017 Operator's Manual

DRIVER INFORMATION
DISPLAY

Introduction

WARNING!
Do not look at the Driver Information
Display for prolonged periods while
the vehicle is moving. Only glance
at the monitor briefly while driving.
Failure to do so can result in the
driver not being attentive to the vehi-
cle's road position, which could lead
to an accident and possible personal
injury or equipment damage.
(03/17)
The Driver Information Display, located
at the top of the instrument cluster,
displays important vehicle information
through a constant monitoring of
systems when any of the following
conditions are met:
•
ignition key in ON or ACC positions
•
ignition timer is active
•
MCS button is pushed
(independent of ignition key
switch position)
•
clock alarm sounds
•
driver or passenger door is opened
•
hazard warning lamp switch is on
The various functions may be
accessed by navigating through Menu
Screens using the MCS. Refer to Menu
Control Switch (MCS) on page 3-8 for
more detail for the MCS.
Y53-6060-1C1

DRIVER INFORMATION DISPLAY

The bullets in the Menu Bar allow
access to each item by pushing
the MCS when the desired bullet is
highlighted.
In addition to a blank screen, the
following are menu items and the
information available within each menu
selections.
3
3-25