Safety Precautions - Zte ZXHN H168M User Manual

Installation
Please use the power adapter supplied. Other power adapters may damage the device or cause
�
device exception.
Pay attention to the capacity of the power socket or power cable. Overloaded power socket or
�
damaged power cable and socket can cause shock or fire. Check the corresponding power cable
regularly and replace it should there be any damage on it.
Do not disassemble the device. Prevent children from using the device without adult supervision
�
lest they swallow small parts.
Do not place the product close to heat source or high temperature place. Avoid direct exposure
�
to the sun.
Do not place the product in damp places or close to water sources. Do not spill any liquid onto
�
the product.
It is recommended to perform installation and configuration with the installation CD.
�
Usage
Wait for at least 15 seconds after power off before powering on the device again.
�
Please keep the heat dissipation holes uncongested. Do not block the holes with any article.
�
Maintain good device ventilation and keep the power plug dry and clean. Please unplug the
�
device immediately should there be any exception (e.g., smoke/noise/smell).
Service
To protect your repair right, do not disassemble or repair the product on your own. Please contact your
service provider in time should any problem (especially the following problems) occur to the product:
The power cable or power plug is damaged.
�
Liquid gets into the shell of the product.
�
The product is soaked in rain or other liquid.
�
The product cannot run normally when being operated according to the instructions.
�
The shell is damaged due to dropping or strike.
�
There is exceptional indication during product running.
�
Safety Sign Conventions
This manual contains the following safety signs:
1 1 1

Safety Precautions

1