Product Features - Zte ZXHN H168M User Manual

Please contact the vendor immediately should there be any incorrect, missing or damaged compo-
nents. Try to keep the package and existing components of the product in the case that the product
needs to be replaced.

Product Features

Technical Features
Support for 4 x 10/100 Mbps Ethernet ports.
�
Support for GUI (graphic user interface) network configuration.
�
Support for the DHCP server function so that a DHCP server can be configured in the network.
�
Compatibility with all Internet standard applications and functions.
�
Support for standard and compatible DSL interfaces.
�
Support for virtual server, IP address filter and DMZ isolation area functions.
�
Support for system function configuration in Web pages.
�
Support for software upgrade by downloading.
�
Support for four types of DSL uplink: ADSL, ADSL2, ADSL2 + ADSL Bonding and VDSL + VDSL
�
Bonding.
Support for sessions of three equivalent route modes (PPPoE, IPoE and StaticIP), each of which
�
supports up to 8 sessions.
Support for RIPv1 version, RIPv2 version and NAT protocol.
�
Support for WLAN (wireless local area network) IEEE802.11b, 802.11g and 802.11n protocols.
�
Interfaces
H168M interfaces and buttons are described in the following table.
Table 1 Interface and Button Description
Interface / Button
POWER
LAN1–LAN4
DSL
On/Off
RESET
Description
Power jack, DC 12 V
RJ-45 LAN port, connected to the local network by the RJ-45 network cable
RJ-14 DSL interface
Power button
Reset button. Press the hole with a needle for at least 5 seconds when the
device is powered on to reset the device to ex-factory default values
4