Toggling Between Displays; Modifying Settings; Labelling A Text Field; Labelling The Text Field Of The Fm-Si Module (Accessory) - Bosch Control 8313 Operating Instructions For Users

3.6.3

Toggling between displays

You can toggle between displays with functions that were available in the
Control 8000 generation of controllers. If this toggle function is active
the symbol is highlighted. Tap the symbol
two displays.
Example for heating circuit
50 °C
on/off
30 %
Fig. 10 Heating circuit view, 8000 series
Off
Fig. 11 Heating circuit view, CSM/CFB series
3.6.4

Modifying settings

1
°C
7 8 9 C
4 5 6 +
-
1 2 3
.
x
0
OK
Off
6
Fig. 12 Modifying settings
[1] Numerical values
[2] Selection box
[3] Scale
Cancel
[4]
[5] Off/On
[6] Save
Control 8313 – 6720859552 (2017/03)
to toggle between the
12:00
0010008705-001
Auto
12:00
0010008712-001
2 3
-30 -22 -15 -7
On
5 4
0010007715-001
Parameters can be changed in a number of different ways, depending on
the menu item.
• Changing numerical value
Numerical values can be changed by entering the number directly. A
keyboard opens when you tap the numerical field.
▶ Type in numerical values and tap
If the values you entered are invalid, the previous value will be
displayed.
• Scale
You can change the value by tapping the Plus and Minus keys.
• Selection box
Tap this field to open a selection box. Tap on the required parameter/
function to select it.

• Labelling a text field

• Off/On
Tap on the required parameter/function to select it.
To save the changes:
▶ Tap Save field.
To cancel the operation:
▶ Tap Cancel field.
If parameters are linked to settings, a temperature, for example, can only
be selected/modified if the function is set to On.
Fields that are not active are highlighted in grey.
If you exit a menu item without saving the settings beforehand, you will
subsequently be prompted to save your settings.
3.6.5 Labelling a text field
In some cases, the selection box contains an empty field/User-defined
which can be labelled by entering text.
▶ Tap on the empty field.
A keyboard opens.
▶ Enter a suitable text for the length of the field.
▶ Confirm entry with
To save the changes:
▶ Tap Save field.
To cancel the operation:
▶ Tap Cancel field.
0
3.6.6

Labelling the text field of the FM-SI module (accessory)

You can name the inputs of the FM-SI safety module according to the
connected safety equipment.
If other devices are connected, you can assign your own names to these
by entering text in an empty field. If fields have been selected but not
saved, the selection is reset.
To label a field:
▶ Tap the field.
The pre-selection opens.
▶ Select name.
-or-
▶ Tap FM-SI field.
A keyboard opens.
▶ Enter a suitable text for the length of the field and tap
Operation of the control unit
to confirm.
to apply.
9