Connectivity; Set Up Access To Mec Remote Portal; Registration Of Control Unit - Bosch Control 8313 Operating Instructions For Users

7

Connectivity

To establish an Internet connection, the Internet connections in the
control unit must be established by an electrician.
WARNING:
Danger to life due to current!
▶ Installation and commissioning as well as maintenance must only be
carried out by an approved and qualified heating contractor.
▶ Electrical work may only be carried out by an authorised specialist.
7.1

Set up access to MEC Remote Portal

7.1.1

Registration of control unit

To be able to access the MEC Remote Portal, the control unit must be
registered there.
The Activation code (registration code), which is glued to the underside
of the cover, is required for the registration ( Fig. 1, [2], page 5).
Registration
▶ Access the MEC Remote Portal:
https://www.mec-remote.com/register/#/license
The terms and conditions of use are displayed.
1
5 4
Fig. 31 Registration
[1] Conditions of use
[2] Language
[3] Continue
[4] Your e-mail address
[5] Agree to Conditions of use
▶ Select language [2].
The terms and conditions of use are displayed in the relevant
language.
▶ Accept Conditions of use [5].
Confirm your acceptance of the following:"I accept the Conditions
of use. If you are a consumer, you have the right to revoke in
accordance with §14 of the Conditions of use."
▶ Enter Your e-mail address [4].
The e-mail address is the login name.
▶ Tap Continue [3] field.
A test message is sent to the stored e-mail address.
▶ Open the e-mail account and follow the link to MEC Remote Portal in
the registration e-mail.
After clicking on the link in the registration e-mail, the Activation
code( Fig. 1, [2], page 5) is requested.
Control 8313 – 6720859552 (2017/03)
Once you have successfully entered the activation code, the user data
input mask opens.
▶ Enter user data.
7
Fig. 32 Enter new user data
[1]
[2]
2
[3]
[4]
[5]
[6]
[7]
Additional input fields are:
• Address (street/house number, with companies: street/house
number of company address)
• Postcode (with companies: postcode of company address)
• Town (with companies: city of company address)
• Country (Country code of customer. E.g. DE = Germany,
GB = Great Britain)
• Password (The password must be at least 12 characters long in
3
0010009260-001 keeping with Bosch rules, and include at least one special character
in addition to upper and lower case letters.)
• Confirm password (When you enter the password again, it must
exactly match the password previously entered.)
• Agreement to the data protection regulations
Acknowledge agreement with the following:
"I have read and noted the data protection information
in §10 of the Conditions of use."
▶ Tap Continue field.
The location information mask for the control is displayed.
▶ Enter information on the system location.
▶ Tap Continue field.
The Geo position does not have to be filled out. Tap the Look Up field to
calculate the Geo-Position data based on the system location details.
The Geo position shows the system location on the map.
Once registration is complete, you will be logged in automatically
at the portal.
▶ Tap the Continue field to save the user data.
Once registration is complete, you will be logged in automatically
at the portal.
1 2 3 4
6 5
Display name (The name is generated automatically. The display
cannot be changed.)
E-mail (The login name was entered on page 1. The display
cannot be changed.)
Company
First name (with companies: first name of contact person)
Surname (with companies: last name of contact person)
Mobile phone number (with companies: mobile telephone
number of contact person)
Language (language selection)
Connectivity
0010009262-001
23