avaya.com
IDE Step 6 – Select the Outbound Attributes name created in Step 3 (i.e. Service-type-ERS as used
in this example) via the Choose Global Outbound Attribute: pull down menu. In the Value
Unsigned – 32 bit window, enter 7 (i.e. value of 7 signifies NAS Prompt for read-only-access).
Click on OK twice when done.
IDE Step 7 – Go to Site Configuration -> Provisioning -> Outbound Values -> New again to create
the outbound attribute for read-write-access. Using the Outbound Attribute created in Step 2, we
will add a value of 6 for read-write-access. Start by entering a name via the Outbound Value
Name: window (i.e. ERSrwa as used in this example) and click on New
Switch User Authentication using Identity Engines Ignition Server Technical Configuration Guide
[July 2010
50