Avaya ERS 8600 Technical Configuration Manual page 25

avaya.com
IDE Step 10 – Via Actions, select Allow. From the All Outbound Values window, select the
output attribute we created previously named 8600ro and click on the less-than arrow key
to move the attribute to the Provision With window
IDE Step 11 – Next, we will add a rule for read-write-access. Start by clicking on Add and
when the New Rule window pops up, add an appropriate name for this rule, i.e. read-write-
access as used in this example
Switch User Authentication using Identity Engines Ignition Server Technical Configuration Guide
[July 2010 25