avaya.com
IDE Step 5 – Using the Outbound Attribute created in Step 3, we will first add an attribute
value of 1 for read-only-access. Start by entering a name via the Outbound Value Name:
window (i.e. 8600-ro as used in this example) and click on New
IDE Step 6 – Select the Outbound Attributes name created in Step 3 (i.e. ERS8600-Access-
Priority as used in this example) via the Choose Global Outbound Attribute: pull down
menu. In the Value Unsigned – 32 bit window, enter 1 (i.e. value of 1 signifies read-only-
access). Click on OK twice when done.
Switch User Authentication using Identity Engines Ignition Server Technical Configuration Guide
[July 2010
13