Avaya ERS 8600 Technical Configuration Manual page 26

avaya.com
IDE Step 12 – Click on New to add a new constraint
IDE Step 13 – For this example, we are simply going to look for the read-write-access user-
id. From Attribute Category, select User and scroll down and select user-id. Select Equal
To with Format of None and enter the read-only-access user id, i.e. 8600rw as used in this
example, in the Static Value window as shown below. Click on OK when done
Switch User Authentication using Identity Engines Ignition Server Technical Configuration Guide
[July 2010 26