Avaya ERS 8600 Technical Configuration Manual page 42

avaya.com
IDE Step 8 – Go to Site Configuration -> Provisioning -> Outbound Values -> New again to create
the outbound attribute for deny access to the CLI command „config qos‟. Using the Outbound
Attribute created in Step 4, we will add a string value of "config qos". Start by entering a name via
the Outbound Value Name: window (i.e. 8600-Command-no-QoS as used in this example) and
click on New
IDE Step 9 – Select the Outbound Attributes name created in Step 4 (i.e. ERS8600-Command-List
as used in this example) via the Choose Global Outbound Attribute: pull down menu. In the String
window, enter config qos (i.e. this is the CLI command we wish to restrict). Click on OK twice
when done.
Switch User Authentication using Identity Engines Ignition Server Technical Configuration Guide
[July 2010 42