Avaya ERS 8600 Technical Configuration Manual page 27

avaya.com
IDE Step 14 – Via Action, select Allow. From the All Outbound Values window, select the
output attribute we created previously named 8600rw and click on the less-than arrow key
to move the attribute to the Provision With window
IDE Step 15 – Finally, we will add a rule for read-write-all-access. Start by clicking on Add
and when the New Rule window pops up, add an appropriate name for this rule, i.e. read-
write-all-access as used in this example
Switch User Authentication using Identity Engines Ignition Server Technical Configuration Guide
[July 2010 27