Avaya ERS 8600 Technical Configuration Manual page 15

avaya.com
IDE Step 9 – Go to Site Configuration -> Provisioning -> Outbound Values -> New again to
create the outbound attribute for read-write-all-access. Using the Outbound Attribute
created in Step 3, we will add an attribute value of 6 for read-write-all-access. Start by
entering a name via the Outbound Value Name: window (i.e. 8600-rwa as used in this
example) and click on New
IDE Step 10 –Select the Outbound Attributes name created in Step 3 (i.e. ERS8600-Access-
Priority as used in this example) via the Choose Global Outbound Attribute: pull down
menu. In the Value Unsigned – 32 bit window, enter 6 (i.e. value of 6 signifies read-write-all-
access). Click on OK twice when done.
Switch User Authentication using Identity Engines Ignition Server Technical Configuration Guide
[July 2010 15