Fender Rumble LT25 Owner's Manual page 19

MENU FUNCTION: SETTINGS
The third MENU function—SETTINGS—displays the current firmware version and features a gain control for
use when recording using the USB port on the control panel. To access these options, press the MENU util-
ity button and use the ENCODER to scroll to and select SETTINGS. The USB gain control appears at top (see
instructions under "USB PORT", page 18), with the firmware version below ("VERSION"):
MENU
TUNER
FOOTSWITCH
SETTINGS
RESTORE
Be sure to check fender.com/firmware/support regularly for firmware updates that improve and enhance the
Rumble LT25 experience.
MENU FUNCTION: RESTORE
The fourth MENU function—RESTORE—enables restoration of all original factory presets and amplifier set-
tings. To do this, press the MENU utility button, then use the ENCODER to scroll to and select RESTORE:
07
ORGAN
TONE
To initiate restoration use the ENCODER to scroll to and select "YES RESTORE". To cancel restoration, press the
ENCODER on "NO CANCEL", or press the BACK utility button. While restoration is in progress, a blue waiting
screen will briefly appear. When restoration is complete, the user is returned to the first preset screen:
RESTORE
FACTORY
RESTORE?
NO CANCEL
YES RESTORE
SETTINGS
USB GAIN +6.0
VERSION
0.3.8
MENU
TUNER
FOOTSWITCH
SETTINGS
RESTORE
RESTORING
FACTORY
SETTINGS
PLEASE WAIT...
17