Fender Rumble LT25 Owner's Manual page 13

To delete an effect, the steps are very similar to those on page 10. As before, access the contents of a preset
by pressing the ENCODER on it, then use the ENCODER to scroll to an occupied effect category box. Press the
ENCODER again to see the effect contained in the effect category box; the name of the effect model is high-
lighted at the top of the DISPLAY WINDOW:
29 AUDIO RA...
AMPLIFIER
ARENA BASS
STOMP MOD
EQ DELAY
Press the ENCODER once more to activate the effect replacement function; the box surrounding the effect
name will turn from blue to red, and white arrows will bracket the effect name. Turn the ENCODER counter-
lockwise until the red-highlighted effect label at the top of the DISPLAY WINDOW reads "NONE". Press the
ENCODER on "NONE" (or press the BACK utility button), after which the user is returned to the preset screen
with the previously occupied effect category box now empty:
NONE
To add an effect to an empty effect category box, first access the contents of a preset by pressing the ENCOD-
ER on it, then use the ENCODER to scroll to the empty effect category box. Press the ENCODER again to access
the empty effect category box; the red-highlighted label "NONE" bracketed by white arrows will appear at the
top of the DISPLAY WINDOW:
23 WAH ECHO
AMPLIFIER
BIG RUMBLE
STOMP STOMP MOD
EQ DELAY
Turn the ENCODER clockwise to scroll through effects models in that category. Press the ENCODER on the
desired effect, after which the box surrounding the effect name will return to blue and the effect is added—
although not yet saved—to that effect category box. Alternately, press the BACK utility button (green arrow)
to return to the preset contents screen (see illustrations on next page):
HALL RVRB
LEVEL 3.8
DECAY 3.2
TONE 10.0
29 AUDIO RA...
AMPLIFIER
ARENA BASS
STOMP MOD
EQ DELAY
NONE
11