Replacing, Adding And Deleting Effects - Fender Rumble LT25 Owner's Manual

REPLACING, ADDING AND DELETING EFFECTS

As noted, each of the four effect category boxes can contain one effect. If an effect is present, it can be re-
placed with another effect in that category, or it can be deleted. If no effect is present, one can be added (see
list of Rumble LT25 effect models on pages 13-14). The signal path is Instrument—Stompbox—Modulation—Am-
plifier—EQ—Delay/Reverb—Speaker, as illustrated at left below.
Note that effects category boxes that already contain an effect have a solid outline, whereas effects category
boxes that do not contain an effect have a dotted outline, as seen in the image at right below:
STOMP
BASS
EQ
Rumble LT25 signal path
To replace an effect, access the contents of a preset by pressing the ENCODER on it, then use the ENCODER
to scroll to one of the four effect category boxes. Press the ENCODER again to see the effect contained in the
effect category box; the name of the effect model is highlighted at the top of the DISPLAY WINDOW:
29 AUDIO RA...
AMPLIFIER
ARENA BASS
STOMP MOD
EQ DELAY
Press the ENCODER once more to activate the effect replacement function; the box surrounding the effect
name will turn from blue to red, and white arrows will bracket the effect name. Turn the ENCODER clockwise
to scroll through other effects models in that category. Press the ENCODER to accept a replacement effect
and exit edit mode; the surrounding box will return to blue. Alternately, press the BACK utility button (green
arrow) to accept the replacement effect and return to the preset contents screen:
ECHO
LEVEL 5.5
TIME 400 MS
FEEDBACK 3.2
WOW 5.5
MOD
AMPLIFIER
DELAY/
REVERB
29 AUDIO RA...
ARENA BASS
SPKR
STOMP
EQ
HALL RVRB
LEVEL 3.8
DECAY 3.2
TONE 10.0
ECHO
LEVEL 5.5
TIME 400 MS
FEEDBACK 3.2
WOW 5.5
10
AMPLIFIER
DOTTED OUTLINE (NO
MOD
EFFECT PRESENT)
SOLID OUTLINE
DELAY
(EFFECT PRESENT)