Attaching The Fan Blades - GE 20772 User Manual

FINISHINGTHEFANINSTALLATION
1.
K
Loosen the 2 canopy mounting screws (K)
on the bottom of the mounting bracket (A),
but do not remove, raise the canopy (C) up
and align the keyholes on the bottom of
canopy (C) with the 2 canopy screws (K)
on the bottom of the mounting bracket (A).

ATTACHING THE FAN BLADES

1.
F
Insert the blade (J) through the slot on the
flywheel of motor assembly (F). Make sure
blade holes and holes on the flywheel are
aligned.
Fan Installation
2.
A
K
C
Rotate the canopy (C) until both
canopy mounting screws (K) from
the mounting bracket (A) slide into
the slot recesses. Tighten screws (K)
securely.
2.
J
Secure the blade (J) to the flywheel using
blade screws (EE). Repeat this step for
remaining blade. Tighten screws (EE)
securely.
3.
C
Slide the canopy cover ring (D) up
and align the screw heads from
the mounting bracket with the
keyhole slots. Twist the canopy
cover ring clockwise to lock into
place.
J
EE
D
11