Mounting And Set-Up - Vents TwinFresh Easy Series User Manual

MOUNTING AND SET-UP

WALL-MOUNTED CONTROL PANEL INSTALLATION

Installation of a LCD control panel
Prepare a hole in the wall and
1.
route all the wires to the installation
place. Insert the supplied mounting
box for flush wall mounting.
8
V127EN-01.indd 8
MAKE SURE THAT THE CONTROL PANEL IS NOT DAMAGED. DO NOT USE A
DAMAGED CONTROL PANEL! DO NOT INSTALL THE CONTROL PANEL ON AN UNEVEN
SURFACE! WHILE TIGHTENING THE SCREWS, DO NOT APPLY EXCESSIVE FORCE TO
PREVENT THE CONTROL PANEL CASING DEFORMATION.
Use a screwdriver to
2.
carefully undo the clips on
the backside of the control
panel and disconnect the
front side from the back
cover. While doing that do
not disconnect the socket
connectors in the casing.
Connect the wires to
3.
terminal blocks on the backside
in compliance with external wiring
diagram. Screw the backside of the
control panel to the mounting box
through the fastening holes. The
screws are included in the delivery
set.
TwinFresh Easy
the Install the control panel
4.
display and press it to fix.
www.ventilation-system.com
29.03.2016 9:56:06