Vents TT EC User Manual

Vents TT EC User Manual

Inline mixed-flow fans

Advertisement

Quick Links

INLINE MIXED-FLOW FANS
VENTS TT PRO EC
TT EC
EN
User's manual
http://vents-us.com

Advertisement

Table of Contents
loading

Summary of Contents for Vents TT EC

  • Page 1 INLINE MIXED-FLOW FANS VENTS TT PRO EC TT EC User’s manual http://vents-us.com...
  • Page 2: Table Of Contents

    This user’s manual is a main operating document intended for technical, maintenance, and operating staff. The manual contains information about purpose, technical details, operating principle, design, and installation of the TT EC unit and all its modifications. Technical and maintenance staff must have theoretical and practical training in the field of ventilation systems and should be able to work in accordance with workplace safety rules as well as construction norms and standards applicable in the territory of the country.
  • Page 3 All user’s manual requirements as well as the provisions of all the applicable local and national construction, electrical, and technical norms and standards must be observed when installing and operating the unit. Disconnect the unit from the power supply prior to any connection, servicing, maintenance, and repair operations.
  • Page 4 • Do not use the unit in a hazardous or explosive environment containing spirits, gasoline, insecticides, etc. • Do not close or block the intake or extract vents in order to ensure the efficient air flow. • Do not sit on the unit and do not put objects on it.
  • Page 5 • Never touch the unit with wet or damp hands. • Never touch the unit when barefoot. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Page 6 If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a safety hazard. If the cord set is damaged, it must be replaced by a special cord set available from the manufacturer or its service agent.
  • Page 7: Delivery Set

    DELIVERY SET — 1 pc. Screws and dowels — 4 pcs. User’s manual — 1 pc. Packing box — 1 pc. BRIEF DESCRIPTION The product described herein is a mixed-flow inline fan for supply or exhaust ventilation of premises heated during winter time.
  • Page 8: Designation Key

    DESIGNATION KEY Options: – built-in smooth speed controller Motor type Outlet duct diameter [mm] Fan model...
  • Page 9: Installation

    INSTALLATION The fan is suitable both for horizontal or vertical mounting on the floor, on the wall or on the ceiling (Fig. 1). While mounting the fan provide extra protection against water ingress, such as: 1. For the top mounting: install an outer protecting hood above (Fig. 2). 2.
  • Page 10: Operation Algorithm

    OPERATION ALGORITHM The motor is controlled by sending of an external control signal from 0 to 10 V to the X2 terminal block or by the R1 internal speed controller. Control method selection is carried out by means of the SW DIP switch: - DIP switch in IN position.
  • Page 11: Manufacturer's Warranty

    Production meets standard operating requirements in the USA and Canada. Vents US warrants to the original purchaser of the unit that it will be free from defects in materials or workmanship for a period of 24 months from the date of original purchase. The Vents US warrants to the original purchaser of the unit that the integrated control unit will be free from defects in materials and workmanship for a period of 24 months from the date of original purchase.
  • Page 12 This warranty supersedes all prior warranties. If proof of sales date is absent, warranty period is calculated from the production date. The unit can be exchanged at the following address: Vents-US 400 Murray Road, Cincinnati, OH 45217, USA Tel: 1-888-640-0925, 513-583-5786, Fax: 513-268-4597 E-mail: support@ventsus.com...
  • Page 13 1 ØD 3 ØD...
  • Page 16 120 V External 60 Hz control device...
  • Page 19 Quality Inspector’s Stamp Sold by (name and stamp of the seller) Manufacture Date Purchase Date...
  • Page 20 Certificate of acceptance TT_________________ The fan is recognized as serviceable. VUSA10-1EN-01...

This manual is also suitable for:

Tt pro ecTt 100 ecTt 125 ecTt 150 ecTt 200 ecTt 250 ec

Table of Contents