Vents TwinFresh Easy Series User Manual page 14

6. Reset to User menu.
Press the button
window will appear automatically 20 seconds after any button was last pressed on the
control panel.
7. Alarm indicator.
— The alarm indicator is displayed during a motor failure.
8. Turning ventilator off.
Open the main window and press the button
If the timer was activated, the ventilator turns off only after expiry of the set time.
To set the ventilator up in OFF-mode start from the point 2.
Turning the ventilator on/off
Setting ventilator speed: III-II-I respectfully
Regeneration mode
The ventilator operates 70 seconds on supply mode and the next 70 seconds in extract mode with energy
regeneration.
Ventilation mode
The ventilator operates exclusively in supply or extract mode. If two ventilators are installed in one system, the
air flow direction is determined by the connection in the external wiring diagram, page 11.
Timer control buttons:
— 4 hours at the speed III
— 8 hours at the speed I
After expiry of the set time period the ventilator reverts to a pre-set speed.
Press any manual speed control button to deactivate the timer.
14
V127EN-01.indd 14
sequentially to open the main window of the user menu. The main
to turn the ventilator off.
REMOTE CONTROL
Remote control
Turning
the ventilator on/off
Speed selection
Regeneration mode
In this mode the ventilator
switches between supply and
extract mode each 70 seconds
with heat regeneration.
Ventilation mode
The ventilator operates in air
extract or air supply mode.
Activation of speed stage
I for 8 hours
Activation of speed stage
III for 4 hours
www.ventilation-system.com
TwinFresh Easy
29.03.2016 9:56:09