Vents TwinFresh Easy Series User Manual page 12

The ventilator is operated with the control panel.
The following parameters are set with the control panel:
• Ventilator speed stage: I, II, III;
• Operation mode: Regeneration or Ventilation;
• Timer-based operation of the ventilator: 4 hours at speed III or 8 hours at speed I.
The control panel displays the following parameters:
• current ventilator speed;
• current operation mode of the ventilator;
• timer operation status (On/Off);
• filter replacement/cleaning need according to indications of the hour meter (factory setting 90 days);
• emergency shutdown of the ventilator in case of a motor failure.
In case of power cut-off the set parameters are saved in the non-volatile memory of the control panel.
Turning ventilator
Exiting setup menu
Entering setup menu
to next menu item
1. Turning ventilator on/off
Connect the ventilator to power mains. The control panel displays the operating status of
the timer.
Press the button
The control panel displays the current speed, active operation mode and the timer
operation status.
2. User menu.
Press the button in cycles for changeover between the user menu items.
— Speed;
— Timer;
— Operation mode;
— Engineering menu.
3. Parameter setting in user menu.
— Speed
Parameter setting using
Speed I —
Speed II —
Speed III —
12
V127EN-01.indd 12
VENTILATOR OPERATION
VENTILATOR OPERATION WITH THE BUTTONS ON THE LCD CONTROL PANEL
on/o
Changeover
to turn the ventilator off.
or buttons.
TwinFresh Easy
Setting selecting
Entering engineering menu
www.ventilation-system.com
29.03.2016 9:56:08