Restoring Factory Defaults - SMC Networks SMCD3GN User Manual

Restoring Factory Defaults

Using the Reset button on the back panel, you can power cycle the Gateway and return it to
its original factory default settings. As a result, any changes you made to the Gateway's
default settings will be removed. To reset the Gateway and keep any overrides you made to
the factory default settings, use the software reset method described under "Using the
Reboot Menu to Reboot the Gateway" on page 59.
1. Leave power plugged into the Gateway.
2. Find the Reset button on the back panel, then press and hold it for at least 10 seconds.
3. Release the Reset button.
Getting to Know Your Gateway
SMCD3GN Wireless Cable Modem Gateway User Manual
14