Table of Contents
Advertisement
Operation
Note. You can view the next sequential ACL Options screen by selecting the up arrow. To
return to the previous ACL Options screen select their Back button to return to the Menu
screen.
Figure 4-13. View ACL Options Screen (Initial Screen)
Table 4-2
below, lists and describes the available ACL options.
Table 4-2. View ACL Options
Option
ACL Stays Offline After
Power-up Initialization
Auto Power-up on
Installed Drive
Unload Mode
Total Reserved Slots
Auto Clean Mode
M8501 and M8502 ACL Tape Drive Installation and User's Guide —529972-001
Description
ACL does not go online after power-up initialization. You
must select the Online option from the Menu screen on the
GUI touch screen. The default is Disabled.
Enables a tape drive to be automatically powered up (after a
delay), after replacing a tape drive.
Selects the unload mode for ACL tape drives. If Implicit, the
ACL unloads a tape drive before attempting to move a
cartridge from that tape drive. If Explicit, the server must
issue a SCSI UNLOAD command to a tape drive before
each MOVE MEDIUM command that removes a cartridge
from that tape drive. The default is Implicit.
Lets you remove from use a specified number of slots at the
rear of the magazine. The default is 0.
Lets you enable an automatic cleaning cycle. To use this
option, you must have reserved a slot for a cleaning
cartridge using the Total Reserved Slots option. The default
is Disabled.
4- 11
View System Data
Advertisement
Table of Contents
