Installing and Configuring the ACL Tape Drive for the
NonStop NS-Series Server
4. View the World Wide Port 0 Name number. This number will be used as the
PORTNAME in step 5.
Figure 3-9. Viewing the Portname
5. In SCF, issue this command:
SCF> ADD TAPE $tape, SENDTO STORAGE, LOCATION (group, module,
slot), SAC sac-id, PORTNAME 64-bit-portname, LUN lun-id
Example:
SCF> ADD TAPE $TAPE1, SENDTO STORAGE, LOCATION (110,2,3), SAC
1, PORTNAME 50060B00002E0934, LUN 1
6. To start the ACL tape drive on the server, issue this command in SCF:
SCF> START TAPE $tape
Example:
SCF> START TAPE $TAPE1
For complete details about the ADD and START commands, including command
syntax, see the SCF Reference Manual for the Storage Subsystem.
M8501 and M8502 ACL Tape Drive Installation and User's Guide —529972-001
3- 10
Configuration