HP M8501 Installation And User Manual page 63

Troubleshooting
Table 6-2. Fault Symptom Codes
Message
Invalid bin number
Zone Sequence Error
Drive 0 Eject Failed
Drive 1 Eject Fail
Drive 2 Eject Fail
Diag get drive 0 status
failed
Diag get drive 1 status
failed
Diag get drive 2 status
failed
Diag get drive 3 status
failed
Drive Stow Failed,
Media Returned to
Source
Drive Stow Failed,
Media Remains in
Drive
UnSupported Drive
For Requested
Operation
No Retry On
Fetch/Stow
Picker Jammed
Picker Jammed 2
Picker Jammed 3
Picker Jammed 4
Picker Jammed 5
Picker Jammed 6
Picker Jammed 7
Picker Jammed 8
M8501 and M8502 ACL Tape Drive Installation and User's Guide —529972-001
FSC ERP
305f F
3060 C, G
3074 C, G
3075 C, D, G
3076 C, D, G
3078 C, D, G
3079 C, D, G
307a C, D, G
307b C, D, G
3082 F
3083 F
3084 F
308F F
3100 C, G
3102 C, G
3103 C, G
3104 C, G
3105 C, G
3106 C, G
3107 C, G
3108 C, G
6 -7
Fault Symptom Codes (FSCs)
Invalid bin number detected in diag.
Eject command time-out.
Eject command time-out.
Eject command time-out.
Eject command time-out.
Failed to get drive status, communication
error.
Failed to get drive status, communication
error.
Failed to get drive status, communication
error.
Failed to get drive status, communication
error.
The DLT drive detected an SDLT cartridge
and the cartridge has been returned to its
orign.
The DLT drive detected an SDLT cartridge
but the cartridge could not be returned to
its origin.
Unsupported drive type.
The loader retried an operation and
retries were disabled.
The picker jammed during loader
initialization.
The picker jammed during a bin stow
operation.
The picker jammed during a bin stow
operation.
The picker jammed during a bin stow
operation.
The picker jammed during a bin stow
operation.
The picker jammed during a bin stow
operation.
The picker jammed during a passthru
fetch operation.
The picker jammed during a pass-thru
fetch operation.