Kenwood NX-5800 Service Manual page 13

NX-5800(B) External View
(170)
ATTENTION:
When installing the option, please take measures to prevent
static electricity.
2.3.1 Ignition Sense Cable (KCT-46: Option)
The KCT-46 is an optional cable for enabling the ignition func-
tion. The ignition function lets you turn the power to the transceiv-
er on and off with the car ignition key.
2.3.1.1 Connecting the KCT-46 cable to the transceiver
(1) Open the KCT-46 fuse holder and insert a mini blade fuse
(3A). <1>
(2) While holding a clear protective cover, remove the black
cap at the end of the yellow cable (ignition sense cable) of
the transceiver. <2>
(3) Connect the plug of the KCT-46 to the yellow cable termi-
nal of the transceiver. <3>
(4) Connect the other end of the KCT-46 to the ignition line of
the car. <4>
Note:
You must setup using the KPG-D1/D1N.
171
M4
24
<2>
<3>
F52-0019-05
<1>
2.3.2 Horn Alert/P.A. Relay Unit (KAP-2: Option)
The Horn alert (max. 2A drive), Public address and External
speaker function are enabled by installing the KAP-2 in the trans-
ceiver.
<4>
Ignition line
of the car
Fig.1
(No.RA017<Rev.003>)1-13