Kenwood NX-5800 Service Manual page 88

Item Condition
Panel tuning
mode
[Analog 1) Adj item:
Narrow] [An ADEV]
Adjust:[****]
2) Adj item:
[Low1]→
[Low3]→
[Low5]→
[Center1]→
[Center3]→
[Center5]→
[High2]→
[High4]→
[High6]
Adjust:[****]
PTT : ON
Press [ ] key to
store the adjust-
ment value.
*2 : Refer to the "4.19.1 Necessary Deviation adjustment item for each signaling and mode" table.
Regarding Maximum Deviation (Analog), it is common with the adjustment of all analog signalings.
14. P25 1) Adj item:
High [P1 PDEV]
Devia- Adjust:[****]
tion Deviation meter
LPF: 3kHz
HPF: OFF
2) Adj item:
[Low1]→
[Low3]→
[Low5]→
[Center1]→
[Center3]→
[Center5]→
[High2]→
[High4]→
[High6]
Adjust:[****]
PTT : ON
Press [ ] key to
store the adjust-
ment value.
1-88 (No.RA017<Rev.003>)
Measurement
PC test mode Test-
equip-
ment
1) Adj item: Devia-
[Maxmum Devia- tion
tion (Analog Nar- meter
row)] Oscil-
2) Adj item: lo-
[Low1]→ scope
[Low3]→
[Low5]→
[Center1]→
[Center3]→
[Center5]→
[High2]→
[High4]→
[High6]
Press [Transmit]
button.
Press [Apply All]
button to store the
adjustment value.
1) Adj item: Devia-
[P25 High Devia- tion
tion] meter
Deviation meter Oscil-
LPF: 3kHz lo-
HPF: OFF scope
2) Adj item:
[Low1]→
[Low3]→
[Low5]→
[Center1]→
[Center3]→
[Center5]→
[High2]→
[High4]→
[High6]
Press [Transmit]
button.
Press [Apply All]
button to store the
adjustment value.
Unit Ter- Unit Parts
minal
Panel ANT Panel [Panel
tuning
mode]
[],
[]
[PC
test
mode]
[←],
[→]
Panel ANT Panel [Panel
tuning
mode]
[],
[]
[PC
test
mode]
[←],
[→]
Adjustment
Method
Write fixed value for 2050~2150Hz
each adjustment point.
(The value is written be- [PC test
low.) Transmit at each mode]
adjustment point and Press [Apply
check that the deviation All] button to
is between 2050Hz and store the
2150Hz. adjustment
Deviation meter value after all
LPF: 15kHz adjustment
HPF: OFF points have
been adjusted.
499
[Panel tuning mode]
PTT: ON
[PC test mode]
PTT: Press [Transmit]
button
Write fixed value for 2771~2883Hz
each adjustment point.
(The value is written be- [PC test
low.) Transmit at each mode]
adjustment point and Press [Apply
check that the deviation All] button to
is between 2771Hz and store the
2883Hz. adjustment
Deviation meter value after all
LPF: 3kHz adjustment
HPF: OFF points have
been adjusted.
504
[Panel tuning mode]
PTT: ON
[PC test mode]
PTT: Press [Transmit]
button
Specifica-
tions
/Remarks