Action Block Res: Modbus Register Reset Action; Action Block Copy: Modbus Register Copy Action; Local Firmware Update - Seneca Z-LOGGER User Manual

18.5.

Action Block RES: Modbus Register Reset Action

This block performs a Modbus Register reset.
The written value is:
Modbus_register= 0
18.6.

Action Block COPY: Modbus Register Copy Action

This block performs a Modbus Register copy from the register connected to Output1 to the register
connected to Output 2 when the input1 is true.
Note that there is also the function block CPY that copy a variable to another variable (Modbus too).
19.

LOCAL FIRMWARE UPDATE

In order to include new functions, the system includes Z-GPRS2/Z-Logger firmware update options.
Various different update modes are available for firmware:
Via USB: This is the easiest method. A complete update takes about 5 minutes. Z-GPRS2 / Z-Logger must
be connected to a PC with SEAL software installed.
Via microSD card: This is the faster method. A complete update takes about 20 seconds. A microSD
adapter for PC (many mobile phones can also read/write microSD) and a microSD card are required. This
method is convenient when several devices are to be updated.
Remote: When the RTU is remote the firmware update can be made by the GPRS or by the Ethernet
passing by an external (GPRS) or internal (Ethernet) FTP server.
USER MANUAL – Z-GPRS2-SEAL / Z-LOGGER-SEAL
154