Table of Contents
Advertisement
Before you start to use the UFS 913, read the chapters "Safety instructions -
Important instructions", "Important information" and "Connection and set-up"
through to the item "First Installation".
Do not connect the unit to the mains until all installation work has been properly
carried out.
The guidance provided in the "First Installation" section assumes that the receiver has been
properly connected as per the "Safety Instructions - Important Information" and "Connection
and Set-Up" chapters through to the "First Installation" section.
Required buttons on remote control for fi rst installation:
...
(red)
First switch your TV set on and select the AV/HDMI input you have used to connect the receiver to your
TV set. Switch on the receiver at the power switch on the rear of the unit. Now perform the fi rst installation.
If you have any questions or encounter problems, contact your specialist dealer.
The following on-screen display appears:
Tip!
Always check the bar at the bottom of
the
on-screen
display.
information on what to do next.
Use the
buttons to select the desired menu language for your UFS 913 and confi rm your
selection using the
are available: German, English, French, Italian, Spanish, Czech, Dutch, Polish, Turkish and Russian.
12
Connection and set-up
First installation
Number input
Go back one step in the
fi rst installation
Select/change individual
menu parameters, navigation
Cancel entry, go back
This
provides
button. The selected language is indicated with a tick. The following languages
Proceed to the next step
(green)
in the fi rst installation
Confi rm the changed
call up the submenus
values/setting;
Advertisement
Table of Contents
