Table of Contents
Advertisement
Quick Links
Huskvarna, 2018-03-12
Safety and Operating Instructions
Dear customer,
thank you for choosing a Husqvarna quality product. We hope that you will genuinely enjoy it.
Please note that the enclosed manual contains Atlas Copco references.
The Husqvarna Group is vouching for the quality of this product.
If you have any questions, please do not hesitate to contact our local sales or service point.
Husqvarna AB
561 82 Huskvarna, Sweden
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Atlas Copco BV30
Summary of Contents for Atlas Copco BV30
- Page 1 Dear customer, thank you for choosing a Husqvarna quality product. We hope that you will genuinely enjoy it. Please note that the enclosed manual contains Atlas Copco references. The Husqvarna Group is vouching for the quality of this product. If you have any questions, please do not hesitate to contact our local sales or service point.
- Page 2 Safety and operating instructions Beams and screeds © 2015 Construction Tools EOOD | No. 9800 1193 01b | 2015-03-03 Original instructions...
-
Page 4: Table Of Contents
Machine data BV30........ -
Page 6: Introduction
Safety and operating instructions Introduction Thank you for choosing a product from Atlas Copco. Since 1873, we have been committed to finding new and better ways of fulfilling our customers' needs. Through the years, we have developed innovative and ergonomic product designs that have helped customers improve and rationalize their daily work. -
Page 7: Safety Instructions
Safety and operating instructions BV 30 Only qualified and trained persons may operate or Safety instructions maintain the machine. They must be physically able to handle the bulk, weight, and power of the machine. To reduce the risk of serious injury or death to Always use your common sense and good yourself or others, read and understand the Safety judgement. -
Page 8: Operating, Precautions
BV 30 Safety and operating instructions Work in a well ventilated area. ► WARNING Slipping, tripping and falling hazards ► If the machine has an exhaust, direct the exhaust There is a risk of slipping or tripping or falling, for so as to reduce disturbance of dust in a dust filled example tripping on the hoses or on other objects. - Page 9 Safety and operating instructions BV 30 WARNING Projectiles WARNING Vibration hazards Failure of the work piece, of accessories, or even of Normal and proper use of the machine exposes the the machine itself may generate high velocity operator to vibration. Regular and frequent exposure projectiles.
-
Page 10: Maintenance, Precautions
► Never modify the machine. Modified machines are not covered by warranty or product liability. Always use original parts and accessories ► approved by Atlas Copco. Change damaged parts immediately. ► ► Replace worn components in good time. WARNING Damaged machine parts Lack of maintenance will result in damaged or worn parts that can cause accidents. -
Page 11: Overview
New labels can be ordered from the spare parts list. Design and function Data plate BV30 is a horizontal plane vibrating screed for use EOOD on fresh concrete surfaces. The machine is used during the final phase to plane and adjust the height... -
Page 12: Vibrating
6. Press the primer until the fuel can be seen in the fuel return pipe. Vibrating Operation Starting up BV30 1. Control the petrol level. Top up with unleaded 95 octane petrol. 2. Open the fuel valve. 3. If the engine is cold, close the choke. -
Page 13: When Taking A Break
Safety and operating instructions BV 30 7. Pull the starter to start the engine. Before starting maintenance on the machine, clean ♦ it in order to avoid exposure to hazardous 8. Immediately open the choke if it was closed and substances. -
Page 14: Every 100 Hours Of Operation (Or Monthly)
BV 30 Safety and operating instructions Every 100 hours of operation (or monthly) Transportation The adjustable handles should be folded in when transporting the machine. Storage ♦ Clean the machine properly before storage, in order to avoid hazardous substances. See section “Dust and fume hazard”. -
Page 15: Troubleshooting
Safety and operating instructions BV 30 Troubleshooting Problem Cause Solution The screed does not start. The engine is set to the OFF position. Set the engine to ON position. The petrol tank is empty. Fill the tank. The engine is cold. Use the choke. -
Page 16: Technical Data
BV 30 Safety and operating instructions Technical data Machine data BV30 BV30 Engine Honda GX35 OHC Power (at 7,000 r.p.m.) kW (hp) (1.6) Speed, r.p.m. 2,000-7,000 Fuel Petrol Tank capacity, litre (gallon) 0.65 (0.17) Oil capacity, litre (gallon) (0.03) Weighted effective acceleration uncertainty (K) m/s 3.25... -
Page 17: Noise Data
Safety and operating instructions BV 30 Noise data Noise Declared values Sound pressure EN ISO 3744 Type BV30 Noise level measured in air at 1 meter, dB(A), according to EN ISO 3744. Uncertainty ±3dB. Dimensions Machine 800-1300 (in.) (27.5) (22.8) (26.4) - Page 18 BV 30 Safety and operating instructions (ft) (ft) (ft) (10) (ft) (12) (ft) (14) © 2015 Construction Tools EOOD | No. 9800 1193 01b | 2015-03-03 Original instructions...
-
Page 19: Ec Declaration Of Conformity
We, Construction Tools EOOD, hereby declare that the machines listed below conform to the provisions of EC Directive 2006/42/EC (Machinery Directive), and the harmonised standards mentioned below. Type Power (kW) Max speed (min-1) Weight(kg) BV30 7,400 14.0 Following harmonised standards were applied: ♦ EN12649... - Page 21 Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. www.atlascopco.com...
Need help?
Do you have a question about the BV30 and is the answer not in the manual?
Questions and answers