Table of Contents
Advertisement
Quick Links
Huskvarna, 2018-03-12
Safety and Operating Instructions
Dear customer,
thank you for choosing a Husqvarna quality product. We hope that you will genuinely enjoy it.
Please note that the enclosed manual contains Atlas Copco references.
The Husqvarna Group is vouching for the quality of this product.
If you have any questions, please do not hesitate to contact our local sales or service point.
Husqvarna AB
561 82 Huskvarna, Sweden
Advertisement
Table of Contents
Related Manuals for Atlas Copco BV Series
Summary of Contents for Atlas Copco BV Series
- Page 1 Dear customer, thank you for choosing a Husqvarna quality product. We hope that you will genuinely enjoy it. Please note that the enclosed manual contains Atlas Copco references. The Husqvarna Group is vouching for the quality of this product. If you have any questions, please do not hesitate to contact our local sales or service point.
- Page 2 Safety and operating instructions Beams and screeds © 2015 Construction Tools EOOD | No. 9800 1722 01 | 2015-04-16 Original instructions...
-
Page 4: Table Of Contents
BV 20H Contents Contents Introduction............... . 5 About the Safety and operating instructions. -
Page 6: Introduction
Safety and operating instructions Introduction Thank you for choosing a product from Atlas Copco. Since 1873, we have been committed to finding new and better ways of fulfilling our customers' needs. Through the years, we have developed innovative and ergonomic product designs that have helped customers improve and rationalize their daily work. -
Page 7: Safety Instructions
Safety and operating instructions BV 20H Safety instructions Personal safety To reduce the risk of serious injury or death to Personal protective equipment yourself or others, read and understand the Safety Always use approved protective equipment. and operating instruction before installing, operating, Operators and all other persons in the working area repairing, maintaining, or changing accessories on must wear protective equipment, including at a... -
Page 8: Operating, Precautions
Wear washable or disposable protective clothes ► Always use original parts and accessories at the worksite, and shower and change into clean approved by Atlas Copco. clothes before leaving the worksite to reduce exposure of dust and fumes to yourself, other Change damaged parts immediately. -
Page 9: Storage
Safety and operating instructions BV 20H Replace worn components in good time. ► WARNING Damaged machine parts Lack of maintenance will result in damaged or worn parts that can cause accidents. Check the moving parts for misalignment or ► binding. Check the machine for broken or, in other ways, ►... -
Page 10: Overview
BV 20H Safety and operating instructions Install the handle link (A). Check that the blocking Overview pins (B) engages the holes in the tube to lock the handle and link firmly together. To reduce the risk of serious injury or death to yourself or others, read the Safety instructions section found on the previous pages of this manual before operating the machine. -
Page 11: Use
Safety and operating instructions BV 20H 5. Simultaneously turn the handle link to adjust the Before starting maintenance on the machine, clean ♦ work angle so the edge of the beam closest to it in order to avoid exposure to hazardous you is slightly raised. -
Page 12: Disposal
BV 20H Safety and operating instructions Disposal A used machine must be treated and disposed in such way that the greatest possible portion of the material can be recycled and any negative influence on the environment is kept as low as possible, and in accordance with local restrictions. -
Page 13: Technical Data
Safety and operating instructions BV 20H Technical data Weights and dimensions BV 20H Total weight, kg (lbs) 7,5 (16,5) Handle link weight kg (lbs) (2,9) Beam dimensions: 2000 x 152 x 35 L x W x H mm (in.) (78.7 x 5.98 x 1.37) Handle tube dimensions (2 pcs.): 1,800 x 2, Ø44 L x W x H mm (in.) - Page 17 Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. www.atlascopco.com...
Need help?
Do you have a question about the BV Series and is the answer not in the manual?
Questions and answers