Table of Contents
Advertisement
18V CORDLESS RECIPROCATING SAW
SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Li-Ion battery. This product has
been marked with a symbol relating
to 'separate collection' for all battery
packs and battery pack. It will
then be recycled or dismantled in
order to reduce the impact on the
environment. Battery packs can be
hazardous for the environment and
for human health since they contain
hazardous substances.
Do not burn
Batteries may enter water cycle if
disposed improperly, which can
be hazardous for ecosystem. Do
not dispose of waste batteries as
unsorted municipal waste.
For indoor use only (for charger)
Positive terminal
Negative terminal
Double insulation (for charger)
Read the operator's manual
RCM marking
ABN: Australian Business Number. By this number,
business information such as entity type, status,
business location etc. can be found at website
http://abr.business.gov.au.
ABN of Positec Australia Pty Ltd is 14 101 682 357
TECHNICAL DATA
Voltage
No load speed
Stroke length
Max cutting capacity
wood
Tool weight
OPERATION INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book carefully.
Intended Use
The machine is intended for sawing wood, plastic,
metal and building materials while resting firmly on the
workpiece. It is suitable for straight and curved cuts.
ASSEMBLY
1. TOOL-LESS BLADE FITTING
Rotate the tool-free blade clamp lever (4) anti-clockwise
and hold, insert the blade shank into the blade clamp
through the blade guard until it stops. Ensure the small
hole in the blade is on the pin in the clamp then release
the lever (See Fig. A). Pull up on blade to make sure
that it is locked in. To remove a blade, carry out these
EN
18V
0-3000/min
20mm
100mm
2.7kg
9
Advertisement
Table of Contents
