Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Rockwell ShopSeries RS3407
Summary of Contents for Rockwell ShopSeries RS3407
- Page 1 900W TWin Blade SaW RS3407...
- Page 4 RS3407...
- Page 5 RS3407 30 mm...
-
Page 6: Component List
900W TWin Blade SaW COMPOnenT liST SPindle lOCking BUTTOn lOWeR gUaRd lUBRiCanT STiCk HOldeR UPPeR gUaRd aUxiliaRy Handle On/Off SWiTCH SPanneR *not all the accessories illustrated or described are included in standard delivery. aCCeSSORieS 1. WORk aRea SafeTy a) keep your work area clean and well lit. Cluttered or Blade (on the machine) dark areas invite accidents. - Page 7 900W TWin Blade SaW keep cord away from heat, oil, sharp edges will do the job better and safer at the rate for which it or moving parts. Damaged or entangled cords was designed. increase the risk of electric shock. b) do not use the power tool if the switch does not e) When operating a power tool outdoors, use an turn it on and off.
-
Page 8: Further Safety Instructions
900W TWin Blade SaW SafeTy inSTRUCTiOnS fOR TWin operator; Blade SaW If the blade becomes twisted or misaligned in the cut, the teeth at the back edge of the blade can dig dangeR: keep hands away from cutting into the top surface of the wood causing the blade area and the blade. - Page 9 900W TWin Blade SaW not move freely and close instantly. never clamp possible, use a jigsaw. or tie the lower guard into the open position. If 10. Only make cuts with the blade direction downwards, saw is accidentally dropped, lower guard may be never upwards or at the side.
-
Page 10: Technical Data
900W TWin Blade SaW SyMBOlS TeCHniCal daTa Voltage 230-240V~50Hz To reduce the risk of injury, user must read Power input 900W instruction manual No load speed 5500/min Blade size 125mm Max. cutting capacity 30mm Warning Protection class Machine weight 3.2kg Work cycle for wood/plastic/ 30min operating time Aluminum/non-ferrous metal... -
Page 11: Maintenance
900W TWin Blade SaW nOTe: After you have switched on the saw, wait until (See Fig. C3). Raise the top saw blade. Raise the bottom saw blade and remove it. the saw blades have reached their top speed before you place them on the workpiece. If the saw blades 4. - Page 12 900W TWin Blade SaW before storage. Saw blades can be protected against corrosion with a thin coat of acid-free oil. Before use, the oil must be removed again; otherwise the wood will become soiled. Resin and glue residue on the saw blade produces poor cuts.
-
Page 13: Troubleshooting
900W TWin Blade SaW TROUBleSHOOTing Problems Possible Causes Corrective action Defective teeth on the saw blade Fit new saw blades Very high spark generation Feed speed too low Increase feed speed Blunt saw teeth Fit new saw blades Feed speed too high Reduce feed speed Damaged teeth Fit new saw blades... - Page 16 Made in PRC...
Need help?
Do you have a question about the ShopSeries RS3407 and is the answer not in the manual?
Questions and answers