Working Hints For Your Reciprocating Saw - Rockwell RD2960.9 User Manual

18V CORDLESS RECIPROCATING SAW EN
into and through the material. Always ensure the blade
is completely through the material before cutting the
remainder of the pocket.
WORKING HINTS FOR YOUR
RECIPROCATING SAW
If your power tool becomes too hot, set the speed to
maximum and run no load for 2-3 minutes to cool the
motor.
Always ensure the work-piece is firmly held or clamped
to prevent movement.
The pivoting foot must be held firmly against the
material being cut to reduce saw vibration, blade
jumping and blade breakage.
MAINTAINACE
Remove the battery pack from the tool before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your power tool.
Never use water or chemical cleaners to clean your power
tool. Wipe clean with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation slots clean.
Keep all working controls free of dust. Occasionally you
may see sparks through the ventilation slots. This is
normal and will not damage your power tool.
The ambient temperature range for tool and battery use
and storage is 0°C-45°C.
The recommended ambient temperature range for the
charging system during charging is 0°C-40°C.
11