RECIPROCATING SAW COMPONENT LIST Blade Pivoting foot plate Blade holder On/Off switch Lock on button Main handle Guide plate adjustment Hex key Not all the accessories illustrated or described are included in standard delivery. ACCESSORIES b) Do not operate power tools in explosive atmospheres, such as in the presence of Blade for wood flammable liquids, gases or dust.
Page 6
RECIPROCATING SAW electric shock. b) Do not use the power tool if the switch does not f) If operating a power tool in a damp location is turn it on and off. Any power tool that cannot be unavoidable, use a residual current device (RCD) controlled with the switch is dangerous and must protected supply.
RECIPROCATING SAW TECHNICAL DATA wiring or its own cord. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the Rated Voltage 220V-240V~ 50Hz operator an electric shock. Rated Power 800W 2.
Page 8
RECIPROCATING SAW ensure the blade is locked securely in place. plate (2) onto the workpiece and switch on. For power tools with stroke speed control, set the maximum Warning: Check the tight seating of the saw stroke speed. Press the power tool firmly against the blade.
RECIPROCATING SAW WORK HINTS FOR YOUR RECIPROCATING SAW If your power tool becomes too hot, set the speed to maximum and run a no load for 2-3 minutes to cool the motor. Always ensure the work-piece is firmly held or clamped to prevent movement.
Page 12
POSITEC AUSTRALIA PTY LTD ABN 14 101 682 357 MADE IN PRC...
Need help?
Do you have a question about the RD3654 and is the answer not in the manual?
Questions and answers