Dick SM-140 Operating Instructions Manual page 28

Machining workpieces
8
8.2
Figure 8.3 – Polishing knives
[1] Positioning angle slanted relative to the running direction
[2] Positioning angle relative to the polishing wheel (approx. 20°)
Risk of injuries
The blade can cut into the polishing wheel and be torn out of your hand.
•
1 Hold the polishing paste against the polishing wheel while it
2 Position the knife slanted relative to the running direction,
3 Position the knife at the polishing wheel at a more obtuse
4 Hone the knife until the burr has been completely removed
5 Polish both sides of the blade alternately.
Belt grinder SM-140
28
Polishing workpieces
(forming an angle of approx. 30° – 60°)
Never polish against the cutting edge.
is running,
angle than for grinding,
and the surface has the required polish.
1
2
WARNING