Dick SM-140 Operating Instructions Manual page 22

Putting into operation
7
Risk of injuries on touching the belt grinder
Touching the grinding belt or polishing wheel while the belt grinder
is switched on causes injuries.
•
•
•
•
Rotating machine parts can catch unsuitable clothing or long hair.
Abrasive particles spun off the machine or loud machine noises
can damage eyes and ears.
Sharp and hot workpieces can cause injuries to hands.
Rotating abrasives can pull off pieces of clothing.
•
•
•
•
•
•
•
•
Belt grinder SM-140
22
Do not touch any abrasives while the belt grinder is
switched on.
Do not use any objects to brake rotating abrasives.
The switched on belt grinder must be inaccessible to persons
not working at the belt grinder, especially to children.
Before leaving the work area, switch off the belt grinder and
remove the mains plug from the socket.
WEAR SUITABLE CLOTHING
Ensure good lighting is available,
wear tight-fitting clothing,
do not wear jewellery,
wear a hair net on long hair,
wear safety glasses or goggles,
wear hearing protection,
wear suitable protective gloves,
do not touch rotating machine parts with parts of the body
covered with fabric.
CAUTION