KIRAMI Premium Grandy Instructions For Use Manual page 25

25/64
© Kirami Oy, Finland
Connections
The tub has a skimmer built in for catching floating debris from water. And also another outlet for
suction and one inlet for returning water. All these connections have a 1 ½" ID thread. The package
also includes hoses that are connected to these connectors and lead to the opposite corner of the
skimmer. The hose ends are marked PUMP and RETURN. The first mentioned is connected to the
pumps suction and the last one to the return side.
Heating can be done with any heating method suitable for swimming pools that can be connected
to pool water circulation system. (for example electric heater, heat pump etc.) Ask for possibilities
from your reseller.
The standard inlet and outlet can also be used with Kirami TUBE firewood powered heater. IF this is
the case then another set of inlet and outlet are installed for the filtration pipe works next to the
heater connectors. More about using Tube heater on the next pages.
INSTRUCTIONS FOR USE: Kirami Premium Grandy 3 / 10
01.06.2018