Do's And Don'ts; Copier - Ricoh Aficio 400 User Manual

Copier

General operations
When you make copies using the bypass tray, paper should be set in the bypass
tray lengthwise (
Do not place sheets of paper or originals on the cover of the large capacity tray.
Do not move the copier when the main switch is turned on.
Do not move the copier a few minutes after the main switch is turned off.
When adding toner
Do not incinerate toner or toner containers. Toner dust might ignite when ex-
posed to open flame.
Dispose of the used toner bottle according to local regulations.
When adding toner, do not turn off the main switch. If you do, your copy settings
are cleared.
Before setting the new toner, shake it well, at least 5 or 6 times.
Do not remove the inner cap of the new toner bottle.
When removing misfed paper
Since some parts of the copier are supplied with high electrical voltage, touch
only the parts specified in the instructions on the sticker inside the machine's
cover.
When removing misfed paper from sections B and C, use cautions. The fusing
unit may be very hot.
Do not leave any torn scrapes within the copier.
When clearing misfeeds, do not turn off the main switch. If you do, your copy
settings are cleared.
After clearing misfeeds, make sure that all units and levers are returned to their
original positions and all covers are closed.
;
).
See page 4 for the position of the fusing unit.

DO'S AND DON'TS

DO'S AND DON'TS
157