Advertisement
QUICKSTART
Operation
3
A
4
A
5
A
6
A
7
A
B
Reverse drive
A Press the driving lever to the rear.
Stop the machine: Release driving lever.
B You can use the info button to set the working
speed.
Setting the water quantity
A Adjust the water quantity using the regulating
button according to the dirt on the floor
covering.
Switching on the cleaning head
A Press the pedal downwards; move it to the
left and release it upward. The cleaning head
is lowered and the brush motor starts auto-
matically.
Contact pressure adjustment
A The desired brush contact pressure is
adjusted by means of the lever.
Lower the vacuum bar
A Turn the lever downwards; the vacuum bar is
lowered and the suction turbine is switched
on.
5.964-036.0 02/11
Advertisement
