Chapter 7 Making Adjustments; Zone Selection - Husky Altanium Delta3 User Manual

User Guide

Chapter 7 Making Adjustments

Adjustments can be made to the process settings for a mold setup before starting the mold,
or while the mold is running. This chapter explains how to use Altanium to monitor and
modify the system.
Altanium allows zone data to be displayed in different graphical and textual formats. These
include tabular views, images with text assigned to them and views that are divided into
groups of zones.
7.1

Zone Selection

Multiple zones can be selected from the following screens:
•
•
•
•
•
•
•
•
•
Zone can also be selected from the following screens:
•
•
•
There are three methods to select zones within a screen:
•
•
•
Zone Selection
v 2.3 — September 2015
Multi Group View
Graphical View
Text View
Quick Set
Art Process
Mold Diagnostics Results
Zone Calibration
Zone Slot
Staging
Neo2 View
Mold Diagnostics
Process Targets
Touching an individual zone element. The individual zone will become selected.
Touching the Select All button to select all the available zone elements.
Using the Block function. The block function works by touching and holding a zone
element for up to a second. This will highlight the zone yellow and/or place a gray
border around it. A user can then touch any other zone element within the screen and
the block of zones between the first and second selections will automatically be
selected.
Making Adjustments
57